Date: July 15, 2007
From: Doug Morgan
Glenn,
Just built this cowl induction setup for the P-1800. It has a three-inch tube. The air box is all-aluminum and follows the contour of the fender -- space is at a premium here. The filter media is down in the cowl. Notice the heat shield under the Webers. Also there are two upper engine braces, if you look close at the pictures. Could you post this along with my other stuff? Thanks.
Doug M.
Date: January 26, 2008
Doug asked me to add the following picture illustrating the new cowl induction setup. He says: "It's now a 3-1/2 inch 6061 T-6 tube with nice rubber elbows."
